- Joined
- Oct 24, 2018
- Messages
- 31
- Reaction score
- 5
I recently just purchased a 1982 Seneca III and the door is leaking. (as they usually are) But when i look at the door the front of it by the windscreen is out about a 1/16 " and the back is flush. The door also looks tweeked. Tight in the rear and slight gap on the front/top-front. I did take it to 2 different mechanics and both said they adjusted it but this is usual due to age. I don't know how to adjust myself but am willing to try. I did put an extra seal and seems to have helped but feel there is too much pressure to close the door.
Anyone know best way to adjust door and recommendations on new door seals?
Anyone know best way to adjust door and recommendations on new door seals?