- Joined
- Dec 24, 2017
- Messages
- 101
- Reaction score
- 46
I just bought two new "Drain Fuel Vent - Weld Assemblies". the Left Hand P/N is 36625-002, and the right hand is a -003 for my Dakota. My question is that if you install them as identified, the slanted side of the tube faces aft and there is a small hole facing forward. the vents that were previously installed had the slant facing forward. The Maintenance Manual and the Parts Catalogue do not depict the installation.
Just thought I would ask the group...
Just thought I would ask the group...