MCHaines
Active Member
- Joined
- Jan 25, 2018
- Messages
- 31
- Reaction score
- 4
Reading AD 2020-24-05 it states “....determine whether the thickness of the component meets or exceeds the minimum thickness at all locations in accordance with table 2 and step 5 in Part I Wing Spar Inspection of Piper SB No. 1304A.” SB No. 1304A Table 2 lists bottom skin thickness minimums not spar thickness minimums. Where can the minimum spar thickness be found? Am I blind or just missing it?
Thanks
Mike
Thanks
Mike