netsurfr
Well-Known Member
- Joined
- Jun 15, 2014
- Messages
- 1,311
- Reaction score
- 132
I've been having an an issue with my stall horn and hoping someone has some guidance. On the ground with master on the stall horn tryst/works fine. Once up in the air and coming in for landing it beeps bit then the circuit breaker pops out. So far a&p fixed some chafing on the wire from the horn in the wing and problem still happened so the n spent more time and found what he thought was the problem with wiring to the buzzer but went flying today and it happened again.
So what could be going on that the stall horn CB pops ONLY when the stall horn goes off during landings but not when tested on the ground? My A&P is suggesting running all new wiring for this stall horn and I'm not convinced that's the next step so hoping for some info...
So what could be going on that the stall horn CB pops ONLY when the stall horn goes off during landings but not when tested on the ground? My A&P is suggesting running all new wiring for this stall horn and I'm not convinced that's the next step so hoping for some info...
Last edited: