- Joined
- Feb 15, 2018
- Messages
- 402
- Reaction score
- 241
Some of you may recognize me as the guy building a scale RC model of the 180C. I've run into a problem with some dimensions I am hoping someone here can help.
Simply put, I need a really good ball park measurement of the fuselage cross section at the pivot point of the Stab. Height and width is fine. Hopefully someone will have their tail cone off and be able to do this easily enough.
I've discovered some errors in the model plans I've been using. I have what I believe to be a good set of 3 views that disagree considerably with the plans. I'd like to get an idea as to which of the two is more accurate before I re-do the entire aft portion of the fuselage.
Thanks to anyone who can help.
Kevin
Simply put, I need a really good ball park measurement of the fuselage cross section at the pivot point of the Stab. Height and width is fine. Hopefully someone will have their tail cone off and be able to do this easily enough.
I've discovered some errors in the model plans I've been using. I have what I believe to be a good set of 3 views that disagree considerably with the plans. I'd like to get an idea as to which of the two is more accurate before I re-do the entire aft portion of the fuselage.
Thanks to anyone who can help.
Kevin
