I purchased my Lance a few months ago, and a bit later noticed that the stall warning horn was not working. (The gear horn works great, so I didn't notice when flight testing it doing stalls with the previous owner.)
On the ground, I move the tab on the wing and hear the microswitch click at about 3/4 of the tab's travel, so that works mechanically, but no horn. The breaker seems ok visually, tho I haven't got my head back there to check the wires yet.
Any common failure mode for this sort of thing? Shall I pull the 6 screws and check the wing switch for continuity? The breaker? Just trying to start my quest at the most likely spot.
Also, where is the horn located in the panel? Easily accessible?
Thanks.
On the ground, I move the tab on the wing and hear the microswitch click at about 3/4 of the tab's travel, so that works mechanically, but no horn. The breaker seems ok visually, tho I haven't got my head back there to check the wires yet.
Any common failure mode for this sort of thing? Shall I pull the 6 screws and check the wing switch for continuity? The breaker? Just trying to start my quest at the most likely spot.
Also, where is the horn located in the panel? Easily accessible?
Thanks.
Last edited: