JohnPhillips
Well-Known Member
- Joined
- Mar 8, 2017
- Messages
- 439
- Reaction score
- 173
About every 4 to 6 weeks the yoke shaft begins to bind ever so slightly where it passes through the bushing on the panel. A quick shot of LS1 always cures the problem but it doesn't seem to last. I've considered trying LS2 but that will also attract more dirt. Anyone have any recommendations for anything that might be a little longer lasting and not attract dirt?
FYI - the bushing on both the pilot and copilot sides are clean and not pitted or corroded nor are the yoke shafts. I lube both at the same time.
Thanks in advance.
FYI - the bushing on both the pilot and copilot sides are clean and not pitted or corroded nor are the yoke shafts. I lube both at the same time.
Thanks in advance.