- Joined
- Sep 4, 2017
- Messages
- 149
- Reaction score
- 99
All my adel clamps (MS 21919) in the engine compartment have deteriorating rubber cushions and I wanted to replace.
Did some research on EAA technical tips? Ouch too painful.
https://video.eaa.org/detail/videos...1/easy-adel-clamp-installation?autoStart=true
Then saw this.
https://aircraft-tool.com/shop/detail.aspx?id=SMA-101
Also available from everywhere.
https://www.aircraftspruce.com/cata...j3SQetbsGajbZF9zgMqwBdR15ntTt8oAaApAlEALw_wcB
https://www.skygeek.com/ats-sma-101-adel-clamp-installer.html
It works like a charm, saved my fingers and sanity.
Tips:
1. Get lots of 10-32 stainless truss head screw long enough to span the plier ends with washer = 5/8, any supplier, Aircraft Spruce, aviall, ect.
2. Premeasure tubes, pipes and cables with micrometer, get large assortment of clamps from Aircraft Spruce measured in 1/16ths, 1 inch tube = #16 Adel clamp. Get more than you think, as you replace you will find more that should be redone. They are cheap.
https://www.aircraftspruce.com/catalog/appages/ms21919clamps.php?clickkey=3764
3. Thin stainless washer, #10L
4. Non nylon lock nut for engine compartment.
As usual, the last to know, hopefully helpful for some other poor soul.
Did some research on EAA technical tips? Ouch too painful.
https://video.eaa.org/detail/videos...1/easy-adel-clamp-installation?autoStart=true
Then saw this.
https://aircraft-tool.com/shop/detail.aspx?id=SMA-101
Also available from everywhere.
https://www.aircraftspruce.com/cata...j3SQetbsGajbZF9zgMqwBdR15ntTt8oAaApAlEALw_wcB
https://www.skygeek.com/ats-sma-101-adel-clamp-installer.html
It works like a charm, saved my fingers and sanity.
Tips:
1. Get lots of 10-32 stainless truss head screw long enough to span the plier ends with washer = 5/8, any supplier, Aircraft Spruce, aviall, ect.
2. Premeasure tubes, pipes and cables with micrometer, get large assortment of clamps from Aircraft Spruce measured in 1/16ths, 1 inch tube = #16 Adel clamp. Get more than you think, as you replace you will find more that should be redone. They are cheap.
https://www.aircraftspruce.com/catalog/appages/ms21919clamps.php?clickkey=3764
3. Thin stainless washer, #10L
4. Non nylon lock nut for engine compartment.
As usual, the last to know, hopefully helpful for some other poor soul.